Chocolate Meltaways: A Fabulous Fudge Recipe (2024)

FAQs

Why is my 3 ingredient fudge not setting? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.

Evaporated milk doesn't have sugar added. The sweetened condended milk is needed as no extra sugar is added to the fudge. If evaporated milk were used then the fudge would not be sweet enough and also would still be too soft unless the fudge is frozen.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Vanilla is often added to chocolate candies or other chocolate recipes because it complements and accents the flavor of chocolate.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

It could be that your fudge is overcooked and this causes the sugar to harden. A sugar thermometer will help you to check it reaches the correct temperature which is the soft ball stage at 112 to 116 °C (234 to 241 °F). If it exceeds this, it is heading for a much chewier consistency.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.

What is the best pan to make fudge in? ›

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

To test the boiling mixture for doneness, drop a bit of it into a bowl of cold water. If it forms a ball that is soft enough to flatten between your fingers, the mixture is ready for cooling. When the fudge cools to 110 degrees F/43 degrees C, beat the mixture vigorously with a wooden spoon until it's no longer glossy.

After the chocolate has mostly melted, stir in the vanilla extract. Continue to stir until the chocolate is completely melted and the mixture is smooth and shiny. Pour into a prepared 8 x 8 inch pan. Let the fudge set at room temperature (covered) for at least four hours.

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

If you let your fudge get too hot, the sugars will start to concentrate and the fudge will be crumbly, dull, and hard. To fix it, put it back into the saucepan and add about 3–4 US tbsp (44–59 ml) of 35% fat whipping cream. Stir the mixture as you heat it until the sugar in the fudge is melted.